Hardware Specifications |
Copper Ports |
24 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots |
4 1000BASE-SX/LX/BX SFP interfaces |
Compatible with 100BASE-FX SFP for port 25 and 26 |
Console |
1 x RJ45 serial port (115200, 8, N, 1) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
56Gbps / non-blocking |
Throughput (packet per second) |
41.6Mpps |
Address Table |
8K entries, automatic source address learning and ageing |
Shared Data Buffer |
8Mbits |
Flow Control |
IEEE 802.3x pause frame for full-duplex |
Back pressure for half-duplex |
Jumbo Frame |
9Kbytes |
Reset Button |
< 5 sec: System reboot |
ESD Protection |
6KV DC |
EFT Protection |
2KV DC |
Enclosure |
IP30 metal case |
Installation |
Rack mount kit |
Connector |
Removable 4-pin terminal block for power input |
Pin 1/2 for Power 1; Pin 3/4 for Power 2 |
Alarm |
Removable 2-pin terminal block for fault alarm |
LED Indicator |
System: |
SYS (Green) |
PWR (Green) |
Alarm (Red) |
Per Port: |
1000 (Orange) |
LNK/ACT (Green) |
Dimensions (W x D x H) |
440 x 253 x 44 mm |
Weight |
3.1kg |
Power Requirements |
12 to 48V DC |
Power Consumption |
11.6 watts / 40BTU (System on) |
20.8 watts / 71BTU (Full loading) |
Layer 2 Functions |
Management Interfaces |
BasicWeb browser, remote Telnet, SNMPv1, v2c, local console |
Secure Management Interface |
SSH, SSL, SNMP v3 |
Port Configuration |
Port disable/enable |
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection |
Flow control disable / enable |
Port Status |
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status. |
Port Mirroring |
TX / RX |
1 to 1 monitor |
VLAN |
802.1Q tagged-based VLAN, up to 255 VLAN groups |
Q-in-Q tunneling |
Private VLAN Edge (PVE) |
Protocol-based VLAN |
MVR (Multicast VLAN Registration) |
Up to 255 VLAN groups, out of 4094 VLAN IDs |
Link Aggregation |
Static trunk |
Supports 2 groups of 4-port trunk support |
QoS |
Traffic classification based, strict priority and WRR |
8-level priority for switching |
- 802.1p priority |
- 802.1Q VLAN tag |
IGMP Snooping |
IGMP (v1/v2/v3) snooping, up to 255 multicast Groups |
IGMP Querier mode support |
Access Control List |
IP-based ACL / MAC-based ACL |
Up to 20 entries |
Bandwidth Control |
Per port bandwidth control |
Ingress: 1Kbps~1000Mbps |
Storm Control |
Broadcast, Unicast and Multicast storm control |
Supports storm control by per port and by VLAN interface |
Rate range: 1~1000000 Kbps |
SNMP MIBs |
RFC-1213 MIB-II |
IF-MIB |
RFC 1493 Bridge MIB |
RFC 1643 Ethernet MIB |
RFC 2863 Interface MIB |
RFC 2665 Ether-Like MIB |
RFC 2737 Entity MIB |
RFC 2618 RADIUS Client MIB |
RFC 2933 IGMP-STD-MIB |
RFC 3411 SNMP-Frameworks-MIB |
IEEE 802.1X PAE |
MAU-MIB |
Layer 3 Functions |
IP Routing Protocol |
RIP v1/v2, OSPF v2, VRRP |
Routing Table |
512 |
Routing Interface |
Per VLAN |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Stability Testing |
IEC 60068-2-32 (Free fall) |
IEC 60068-2-27 (Shock) |
IEC 60068-2-6 (Vibration) |
Standards Compliance |
IEEE 802.3 10BASE-T |
IEEE 802.3u 100BASE-TX / 100BASE-FX |
IEEE 802.3z Gigabit SX/LX |
IEEE 802.3ab Gigabit 1000T |
IEEE 802.3x flow control and back pressure |
IEEE 802.1D Spanning Tree Protocol |
IEEE 802.1w Rapid Spanning Tree Protocol |
IEEE 802.1s Multiple Spanning Tree Protocol |
IEEE 802.1p Class of service |
IEEE 802.1Q VLAN tagging |
IEEE 802.1x Port Authentication Network Control |
RFC 768 UDP |
RFC 791 IP |
RFC 792 ICMP |
RFC 2068 HTTP |
RFC 1112 IGMP version 1 |
RFC 2236 IGMP version 2 |
RFC 3376 IGMP version 3 |
RFC 2131/2132 DHCP (Server) |
RFC 2328 OSPF v2 |
RFC 1058 RIP v1 |
RFC 2453 RIP v2 |
RFC 3768 VRRP v2 |
Environment |
Operating |
Temperature: -40 ~ 75 degrees C |
Relative Humidity: 5 ~ 95% (non-condensing) |
Storage |
Temperature: -40 ~ 85 degrees C |
Relative Humidity: 5 ~ 95% (non-condensing) |