|
Model |
FNSW-1608PS |
|
Hardware Specification |
|
Fast Ethernet Ports |
16 10/ 100Base-TX RJ-45 Auto-MDI / MDI-X ports |
|
Power over Ethernet ports |
8-Port with PoE injector function (Port 1 to port 8) |
|
Switch Processing Scheme |
Store-and-Forward |
|
Throughput (packet per second) |
2.38Mpps |
|
Switch fabric |
3.2Gbps |
|
Address Table |
4K entries |
|
Share data Buffer |
2.75Mb embedded memory for packet buffers |
|
Flow Control |
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
|
Dimension (W x D x H) |
440 x 120 x 44 mm (1U height) |
|
Weight |
1.75 kg |
|
Power Requirement |
100-240V AC, 50-60 Hz, 1A |
|
System operation Power Consumption / Dissipation (Full load) |
13 watts / 46BTU |
|
Temperature |
Operating: 0~50 Degree C |
|
Storage: -40~70 Degree C |
|
Humidity |
Operating: 5~90% (Non-condensing) |
|
Storage: 5~90% (Non-condensing) |
|
Power over Ethernet |
|
PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
|
PoE Power Supply Type |
End-Span |
|
PoE Power Output |
Per Port 48V DC, 350mA. Max. 15.4 watts |
|
Power Pin Assignment |
1/2(+), 3/6(-) |
|
Power Budget |
110 watts |
|
Smart function |
|
System Configuration |
Web interface |
|
Alert Trap |
SNMP Trap for alarm notification of events |
|
Port configuration |
Port speed duplex mode selection. Flow control disable / enable. Port disable / enable. Port description on each port |
|
Bandwidth Control |
Yes, 1Mbps / 2Mbps / 4Mbps / 8Mbps / 16Mbps / 32Mbps / 64Mbps |
|
Broadcast Storm Control |
Yes, 5% / 10% / 25% / 50% / Disable |
|
Port Statistics |
Display each port's detail Ethernet traffic counter information |
|
VLAN |
16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN |
|
Port trunking |
Supports 2 groups of 4-Port trunk support, up to 800Mbps bandwidth per trunk |
|
Port Mirroring |
Port mirroring allows monitoring of the traffic across any port in real time |
|
QoS |
Allows to assign low / high priority on each port |
|
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy |
|
MAC address / TCP & UDP filter |
Yes |
|
IGMP Snooping v1 / v2 |
Allows to disable or enable |
|
PoE power control |
Allows to disable or enable power provision and assign priority on each PoE port |
|
Standards Conformance |
|
Regulation Compliance |
FCC Part 15 Class A, CE |
|
Standards Compliance |
IEEE 802.3：Ethernet |
|
IEEE 802.3u：Fst Ethernet |
|
IEEE 802.3x：Full-duplex Flow control |
|
IEEE 802.3af：Power over Ethernet |
|
IEEE 802.1Q：VLAN |
|
IEEE 802.1p：QoS |
|
The specification is for FNSW-1608PS hardware version 2 only. |
/PoEswitch/box_FNSW-1608PSv2_s.jpg)
/PoEswitch/MD-FNSW-1608PSv2_s.gif)