|
Hardware Specifications |
|
Copper Port |
1 x 10/100/1000Base-T RJ-45 TP |
|
Auto-MDI/MDI-X, Auto-Negotiation |
|
SFP / mini-GBIC Slots |
2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2) |
|
Compatible with 100Base-FX SFP |
|
DIP Switch |
DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX |
|
DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX |
|
DIP-3: Switch mode / Fiber Redundant mode |
|
Connector |
Removable 6-pin terminal block |
|
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
|
Alarm |
Provides one relay output for power failure |
|
Alarm Relay current carry ability: 1A @ DC 24V |
|
LED |
3 x LED for System and Power: |
|
■ Green: DC Power 1 |
|
■ Green: DC Power 2 |
|
■ Green: Power Fault |
|
2 x LED for Per Copper Port: |
|
■ Green: 1000 LNK/ACT |
|
■ Orange:100 LNK/ACT |
|
1 x LED for Per mini-GBIC interface (Port-1 and Port-2): |
|
■ Green: LNK/ACT |
|
ESD Protection |
6KV DC |
|
EFT Protection |
6KV DC |
|
Enclosure |
IP30 type metal case |
|
Installation |
DIN rail kit and wall mount ear |
|
Dimensions (W x D x H) |
135 x 87 x 32mm |
|
Weight |
505g |
|
Power Requirements |
DC 12~48V or AC 24V |
|
Redundant power with polarity reverses protection function |
|
Power Consumption / Dissipation |
4.8 watts/16BTU |
|
Cable |
Twisted-Pair |
|
10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters |
|
100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters |
|
1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters |
|
Fiber-Optic Cable |
|
1000Base-SX: |
|
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m |
|
1000Base-LX: |
|
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 |
|
kilometers (vary on SFP module) |
|
100Base-FX: |
|
● 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 |
|
kilometers |
|
● 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers |
|
(vary on SFP module) |
|
Switch Specification |
|
Switch Processing Scheme |
Store-and-Forward |
|
Address Table |
1K entries |
|
Flow Control |
Back pressure for half duplex |
|
IEEE 802.3x Pause Frame for full duplex |
|
Switch fabric |
6Gbps |
|
Throughput (packet per second) |
4.46Mpps@64bytes |
|
Maximum Transmit Unit |
9216 bytes |
|
Speed |
SX/LX: 2000Mbps (full-duplex) |
|
FX: 200Mbps (full-duplex) |
|
TP: 10/20Mbps, 100/200Mbps, 2000Mbps |
|
Standards Conformance |
|
Standards Compliance |
IEEE 802.3 Ethernet / 10Base-T |
|
IEEE 802.3u Fast Ethernet / 100Base-TX |
|
IEEE 802.3ab Gigabit Ethernet / 1000Base-T |
|
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX |
|
IEEE 802.3x Full-Duplex Flow Control |
|
IEEE 802.3at High Power over Ethernet |
|
IEEE 802.3af Power over Ethernet |
|
Regulation Compliance |
FCC Part 15 Class A, CE |
|
Stability Testing |
IEC60068-2-32(Free fall) |
|
IEC60068-2-27(Shock) |
|
IEC60068-2-6(Vibration) |
|
Environment |
|
Temperature |
Operating: |
-40~75 degree C |
|
Storage: |
-40~75 degrees C |
|
Humidity |
Operating: |
5~95% (Non-condensing) |
|
Storage: |
5~95% (Non-condensing) |
