|
Hardware Specifications |
|
Interfaces |
LAN: |
|
1 x 10/100/1000BASE-T RJ45 port |
|
Auto-negotiation and auto MDI/MDI-X |
|
USB: |
|
1 x micro USB 2.0 port |
|
Antennas |
Gain: Internal PIFA antenna (3 x 2.4GHz 4dBi, 3 x 5GHz 5dBi) |
|
Button |
Reset button |
|
LED Indicators |
PWR/Diag LED |
|
Allow LED to turn off via software control |
|
Other |
Internal buzzer |
|
Material |
Plastic front panel, metal rear panel |
|
Dimensions (Φ x H) |
208 x 31.5 mm |
|
Weight |
590g |
|
Power Requirements |
PoE: 802.3at PoE-PD Class 4 |
|
12V DC, 2.5A (not included in the standard package) |
|
Power Consumption (Max.) |
15W, 19.2W (with USB) |
|
Mounting |
Ceiling mount |
|
Wireless Interface Specifications |
|
Standard |
IEEE 802.11ac 5GHz |
|
IEEE 802.11a/n 5GHz |
|
IEEE 802.11b/g/n 2.4GHz |
|
Antenna Structure |
802.11ac: 3T3R MU-MIMO |
|
802.11n: 3T3R MIMO |
|
Modulation |
DSSS |
|
Data Modulation |
802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) |
|
802.11a/g/n: OFDM (BPSK/QPSK/16QAM/64QAM) |
|
802.11b: DSSS (DBPSK/DQPSK/CCK) |
|
Band Mode |
2.4G/5G concurrent mode |
|
Frequency Range |
■ 2.4GHz: |
|
America -- FCC: 2.412~2.462GHz |
|
Europe -- ETSI: 2.412~2.484GHz |
|
■ 5GHz: |
|
America -- FCC: 5.180~5.240GHz, 5.725~5.850GHz |
|
Europe -- ETSI: 5.180~5.240GHz |
|
Operating Channels |
■ 2.4GHz |
|
America -- FCC: 1~11 |
|
Europe -- ETSI: 1~13 |
|
■ 5GHz |
|
America -- FCC: |
|
36, 40, 44, 48, 149, 153, 157, 161, 165 |
|
Europe -- ETSI: |
|
36, 40, 44, 48 |
|
5GHz channel list will vary in different countries according to their regulations. |
|
Channel Width |
802.11ac: 20/40/80MHz |
|
802.11n: 20/40MHz |
|
Transmission Speed |
450 + 1300Mbps (2.4GHz + 5GHz) |
|
Transmission Distance |
802.11ac: up to 35m |
|
802.11n: up to 70m |
|
802.11a/b/g: up to 30m |
|
|
|
The estimated transmission distance is based on the theory. The actual distance will vary in different environments. |
|
Max. RF Power (limited by local regulation) |
■ 5GHz: |
|
802.11ac (VHT20/40/80): 27.5dBm @MCS0 |
|
802.11ac (VHT20/40/80): 22.5dBm @MCS7 |
|
802.11ac (VHT20/40/80): 19.5dBm @MCS9 |
|
802.11n (HT20/40): 27.5dBm @MCS0/MCS8 |
|
802.11n (HT20/40): 22.5dBm @MCS7/MCS15 |
|
802.11a: |
|
26.5dBm @6Mbps |
|
22.5dBm @54Mbps |
|
|
|
■ 2.4GHz: |
|
802.11n (HT20/40): 27.5dBm @MCS0 |
|
802.11n (HT20/40): 22.5dBm @MCS7 |
|
802.11g: 27.5dBm @6Mbps |
|
802.11g: 23.5dBm @54Mbps |
|
802.11b: 27.5dBm @1Mbps |
|
Receive Sensitivity |
■ 5GHz: |
|
802.11ac (VHT20/40/80): -84dBm @MCS0 |
|
802.11ac (VHT20/40/80): -58dBm @MCS9 |
|
802.11n (HT20): -90dBm @MCS0, -70dBm @MCS7 |
|
802.11n (HT40): -87dBm @MCS0, -68dBm @MCS7 |
|
802.11a: -90dBm @6Mbps |
|
802.11a: -71dBm @54Mbps |
|
|
|
■ 2.4GHz: |
|
802.11n (HT20/40): -83dBm @MCS0 |
|
802.11n (HT20/40): -66dBm @MCS7 |
|
802.11g: -86dBm @54Mbps |
|
802.11g: -72dBm @54Mbps |
|
802.11b: -93dBm @1Mbps |
|
802.11b: -85dBm @11Mbps |
|
Software Features |
|
Operation Mode (NMS) |
■ AP Controller ■ Managed AP |
|
Wireless Mode |
■ AP (Access Point) |
|
■ WDS PTP (Point to Point) |
|
■ Repeater |
|
■ WDS PTMP (Point to Multipoint) |
|
Encryption Security |
■ WEP (64/128-bit) encryption security |
|
■ WPA/WPA2 (TKIP/AES) |
|
■ WPA-PSK/WPA2-PSK (TKIP/AES) |
|
■ 802.1x authentication |
|
Wireless Security |
■ Wireless MAC address filtering up to 256 entries |
|
■ Wireless Client Isolation: STA separator, SSID separator |
|
■ Supports WPS (Wi-Fi Protected Setup) |
|
■ Enable/Disable SSID broadcast |
|
Wireless Advanced |
■ 6-level adjustable Tx power (100%, 90%, 75%, 50%, 25%, 10%) |
|
■ Multiple SSIDs: up to 16 at 2.4GHz and 16 at 5GHz |
|
■ Tagged VLAN per SSID, tagged VLAN over WDS |
|
■ Auto-channel selection: enables an AP to determine the best channel |
|
available |
|
■ Rogue AP detection |
|
■ Provides wireless statistics for system administrator monitoring |
|
Max. Clients |
Wired: 253 |
|
2.4GHz Wireless: 50 |
|
5GHz Wireless: 50 |
|
Max. WDS Peers |
Up to 4 at 2.4GHz and 4 at 5GHz |
|
QoS |
■ IEEE 802.11e WMM (Wi-Fi Multimedia) |
|
■ Station Idle Timeout: Enables and configures it to prevent inactivated |
|
clients from occupying the connection. |
|
■ AP Load Balancing: To balance the distribution of wireless client |
|
connections across multiple APs. |
|
■ Supports multicast rate adaptation mechanism to guarantee the wireless |
|
bandwidth and service quality. |
|
LAN |
Static IP, DHCP Client, DHCP Server |
|
Supports 802.1d Spanning Tree (RTSP) |
|
Supports 802.1Q tagged/untagged VLAN (VID: 1-4095) |
|
System Management |
■ NMS firmware-based management interface: |
|
- Supports up to 5 managed APs with no additional wireless controller |
|
- Features dashboard and zone plan with heat map, AP cluster |
|
management, AP bulk firmware upgrade, AP/client status monitoring |
|
■ Web-based (HTTP/HTTPS/SSH/CLI) management interface |
|
■ SNMP v1, v2c, v3 management interface |
|
■ Built-in RADIUS server with EAP authentication (MS-PEAP), |
|
user account up to 256 |
|
■ SNTP synchronization |
|
■ Easy firmware upgrade |
|
■ Supports self-healing (schedule reboot) mechanism for |
|
reliable connection |
|
■ Supports PLANET Smart Discovery Utility |
|
■ Supports system log and syslog server |
|
Standards Conformance |
|
IEEE Standards |
IEEE 802.11ac (wave 1, 3T3R, up to 1300Mbps) |
|
IEEE 802.11n (3T3R, up to 450Mbps) |
|
IEEE 802.11g |
|
IEEE 802.11a |
|
IEEE 802.11b |
|
IEEE 802.11i |
|
IEEE 802.3 10BASE-T |
|
IEEE 802.3u 100BASE-TX |
|
IEEE 802.3ab 1000BASE-T |
|
IEEE 802.3x Flow Control |
|
IEEE 802.3az Energy Efficient Ethernet |
|
Other Protocols and Standards |
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP |
|
Environment & Certification |
|
Temperature |
Operating: 0 ~ 50 degrees C |
|
Storage: -20 ~ 60 degrees C |
|
Humidity |
Operating: 10 ~ 90% (non-condensing) |
|
Storage: 5 ~ 90% (non-condensing) |
|
Regulatory |
FCC, CE |
