|
Camera |
|
Image Device |
1/3” 3 mega-pixel progressive scan CMOS sensor |
|
Lens |
3~10.5 mm vari-focal |
|
Angle of view: |
|
H: 91.2~25.5 degrees |
|
V: 68.4~19.1 degrees |
|
D: 114~31.9 degrees |
|
Min Illuminator |
Color: 0.5 lux @ 30 IRE |
|
B/W: 0 lux @ IR ON |
|
IR Illumination LED |
4 x high power IR LED, 850nm |
|
Built-in IR illuminators, effective up to 30 meters |
|
*The IR distance is based on the environment |
|
Effective Pixels |
2048 x 1536 pixels |
|
Image |
|
Video Encoder |
H.264 / MPEG-4 / M-JPEG |
|
High Resolution Mode |
H.264@ QXGA (2048 x 1536) |
|
MPEG4 @1080p |
|
MJPEG @D1 |
|
Frame Rate |
QXGA (2048 x1536): 20fps |
|
1080p (1920 x 1080): 30fps |
|
Quad-VGA (1280 x 960): 30fps |
|
720p (1280 x 720): 30fps |
|
D1(720 x 480): 30fps |
|
VGA (640 x 480): 30fps |
|
QVGA (320 x 240): 30fps |
|
Image Setting |
Brightness, sharpness, contrast, saturation, mirror, day/night mode, WDR, remote focus, text, time and image overlay |
|
Streaming |
Simultaneous multi-profile streaming |
|
M-JPEG streaming over HTTP |
|
Supports 3GPP mobile surveillance |
|
Controllable frame rate and bandwidth |
|
Constant and variable bit rate (MPEG4 / H.264) |
|
Audio |
|
Audio Streaming |
Two-way audio |
|
Audio Encoder |
G.711 μ-law |
|
Microphone |
External microphone input |
|
Audio Output |
External speaker supported |
|
Network and Configuration |
|
Network Standard |
IEEE 802.3 10BASE-T |
|
IEEE 802.3u 100BASE-TX |
|
Supported Protocols |
TCP/IP, IPv4, IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP |
|
Security |
Password protection, IP address filtering, HTTPS |
|
QoS/DSCP |
|
Users |
5 clients on-line monitoring at the same time |
|
System Integration |
|
Application Programming Interface |
Open API for software integration |
|
ONVIF Compliant |
|
Alarm Triggering |
Intelligent video motion detection and external input |
|
3-zone video motion detection |
|
Alarm Events |
File upload via SD card, FTP, email and SAMBA. |
|
External output activation |
|
Configurable pre/post alarm buffering |
|
General |
|
Power Supply |
12V DC, 2A |
|
IEEE 802.3af Class 3 |
|
Power Consumption |
Max. 9W while IR LED is ON |
|
Max. 7W while IR LED is OFF |
|
Housing |
Weather-proof IP66-rated housing |
|
Operating Temperature |
-20~50 degrees C (32~122 degrees F) |
|
Operating Humidity |
20% ~ 85% (non-condensing) |
|
Weight |
1200g |
|
Dimensions (Φ x L) |
73 x 183 mm |
|
Emission |
CE, FCC |
|
Connectors |
10/100 Mbps Ethernet, RJ45 |
|
DC power jack |
|
Terminal block for 1 alarm input, 1 output |
|
External microphone input |
|
Audio out |
|
Micro SD/SDHC card slot (max. 32GB, class 10) |